Back

EXTREME_HOT S3

OUR RECOMMENTATION
FOR HEAVY INDOOR WORK

EN ISO 20345:2011 S3 HI/CI HRO SRA


Additional benefits: highest protection in contact with liquid steel, 5 sec. direct contact with molten steel at 1500°C – 100% protection, especially suitable for steelworks in areas such as blast furnaces

FOR METAL CASTERS AND FURNACE WORKERS

  • Colour: silver
  • Aluminised, cowhide, leather thickness 2.6
  • 2.8 mm
  • Outside ALUline protector, extremely heat resistant and reflective
  • KEVLAR lining with ALUline protector
  • extremely heat-resistant and heat-reflecting
  • HEIGHT: 30 cm
  • SPACER FABRIC Air-cooled lining, automatic rear ventilation through two layers, high breathability
  • Anatomically preformed insole with arch stabiliser
  • The steel toe cap offers maximum protection.
  • Rukapol Zermatt_HOT rubber sole for extreme heat stress, short-term up to approx. 300°C.
  • The original Rukapol multiple width system ensures a perfect fit.
  • Rukapol functional foot bed Fit-Aktiv-ALU, high insulation thanks to aluminium layer in the insole
  • Individually adjustable calf width for perfect adaptation to every calf
  • Specially tanned cowhide leather prevents shrinkage when exposed to heat
  • Aluminium-vaporised cowhide leather in a vacuum process ensures permanent heat reflection
  • Metal thread prevents melting under the influence of heat, shaft remains undamaged and liquid-tight
  • 100% Kevlar® fabric with elastic, flame-retardant silicone-carbon coating for additional safety in the case of direct material contact
  • with the boot
  • Extremely heat-resistant rubber outsole for direct contact heat
  • Special Kevlar® interlining with aluminium coating provides high insulation values against radiant heat
  • Practical test: Immersion of the boot at 1,500°C in liquid steel for 5 seconds, result: 100% protection for the foot

 

Übergrößen bei Schuhen:                                                        

ab Größe 48 werden Übergrößenzuschläge verrechnet.                                                           

We reserve the right to make changes in material for larger and smaller sizes!

Model changes are possible.

Übergrößen sind Sonderproduktionen und daher vom Umtausch ausgeschlossen.

 

Flame Index

Height: 30 cm

Color: silver


Select your model

Color:silver
Variation:
€260.00
excl. VAT.

Additional info for over maximum size charge see 'more info' down below.

OUR RECOMMENTATION
FOR HEAVY INDOOR WORK

EN ISO 20345:2011 S3 HI/CI HRO SRA


Additional Benefits highest protection in contact with liquid steel, 5 sec. direct contact with molten steel at 1500°C – 100% protection, especially suitable for steelworks in areas such as blast furnaces

FOR METAL CASTERS AND FURNACE WORKERS

  • Colour: silver
  • Aluminised, cowhide, leather thickness 2.6
  • 2.8 mm
  • Outside ALUline protector, extremely heat resistant and reflective
  • KEVLAR lining with ALUline protector
  • extremely heat-resistant and heat-reflecting
  • HEIGHT: 30 cm
  • SPACER FABRIC Air-cooled lining, automatic rear ventilation through two layers, high breathability
  • Anatomically preformed insole with arch stabiliser
  • The steel toe cap offers maximum protection.
  • Rukapol Zermatt_HOT rubber sole for extreme heat stress, short-term up to approx. 300°C.
  • The original Rukapol multiple width system ensures a perfect fit.
  • Rukapol functional foot bed Fit-Aktiv-ALU, high insulation thanks to aluminium layer in the insole
  • Individually adjustable calf width for perfect adaptation to every calf
  • Specially tanned cowhide leather prevents shrinkage when exposed to heat
  • Aluminium-vaporised cowhide leather in a vacuum process ensures permanent heat reflection
  • Metal thread prevents melting under the influence of heat, shaft remains undamaged and liquid-tight
  • 100% Kevlar® fabric with elastic, flame-retardant silicone-carbon coating for additional safety in the case of direct material contact
  • with the boot
  • Extremely heat-resistant rubber outsole for direct contact heat
  • Special Kevlar® interlining with aluminium coating provides high insulation values against radiant heat
  • Practical test: Immersion of the boot at 1,500°C in liquid steel for 5 seconds, result: 100% protection for the foot

 

Übergrößen bei Schuhen:                                                        

ab Größe 48 werden Übergrößenzuschläge verrechnet.                                                           

We reserve the right to make changes in material for larger and smaller sizes!

Model changes are possible.

Übergrößen sind Sonderproduktionen und daher vom Umtausch ausgeschlossen.

 

Flame Index

Impact Indicator

Sole
100%

Schaft
100%

Height 30 cm

Color silver


Oversize surcharges for shoes:

Size 48 - € 27,50
Size 49 - € 50,00
Size 50 - € 50,00
Size 51 - € 100,00
Size 52 - € 115,00

STANDARDS INFO

SAFETY SHOES
ACCORDING TO EN ISO 20345:2011
WITH TOE PROTECTION CAPS
With A TEST ENERGY
OF 200 JOULES


SB all basic requirements are fulfilled
S1 all basic requirements are fulfilled, in addition
• closed heel area
• Anti-static
• Energy absorption capacity in the heel area
• Fuel resistance of the outer sole S2 like S1, in addition
• Water penetration and water absorption S3 like S2, in addition
• Resistance to penetration
• treaded outsole


OCCUPATIONAL SHOE
ACCORDING TO EN ISO 20347:2011
WITHOUT TOE CAPS


OB all basic requirements are fulfilled
01 All basic requirements are fulfilled, in addition
• closed heel area
• Anti-static
• Energy absorption capacity in the heel area
• Fuel resistance of the outer sole 02 like 01, in addition
• Water penetration and water absorption 03 like 02, in addition
• Resistance to penetration
• treaded outsole ORTHOPEDIC SAFETY AND OCCUPATIONAL SHOES according to ÖNORM Z1259

PROPERTIES OF THE SYMBOLS

P Resistance to penetration
HI Thermal insulation
CI Cold insulation
HRO Resistance of the outsole to contact heat
WR Waterproofing of the entire shoe
SRA Slip resistance indicator
SRC Slip resistance indicator

Terms of delivery:

free domicile from a net goods value of €370.00 for all deliveries within Austria (DDP); up to a net goods value of €369.00, a freight charge of € 6.90 per delivery will be invoiced.

For deliveries outside of Austria, deliveries are ex works (EXW Ramingdorf).

Payment conditions:
10 days from the invoice date with 3% discount or 30 days from the invoice date net without any deduction. All prices listed are net prices without VAT. Our general terms and conditions apply. Printing and typesetting errors reserved!